Dimerized Small-Molecular Acceptor Enables the Organic Bulk-Heterojunction Layer with High Thermal Stability.

Incorporation of a non-fullerene acceptor (NFA) into an organic bulk-heterojunction currently has realized the extendable spectral response and high photocurrent generation in organic photodiodes. However, to allow these organic materials to be industrially commercialized, the thermal stability which enables the materials to survive under the process integration and operation needs to be considered. Generally, NFA small molecules showed high crystallinity, which aggregated through heating and led to the poor thermal stability. To tackle the thermal stability issue of highly efficient NFAs, two IDIC-based NFA dimers─IDIC-T Dimer and IDIC-TT Dimer─were designed, synthesized, and characterized; the thermal stability of the BHJ layer incorporating these dimer molecules was evaluated and compared with that of the BHJ layer using the monomer, IDIC-4Cl, as acceptors. Eventually, a power conversion efficiency of 9.44% was achieved for organic photovoltaic devices based on the NFA dimer. The dimers also showed remarkable thermal stability than the IDIC-4Cl monomer, which provided a promising direction for the polymer/small-molecule system in organic photodiodes for industrial practicability.

Large-Area Nonfullerene Organic Photovoltaic Modules with a High Certified Power Conversion Efficiency.

Achieving large-area organic photovoltaic (OPV) modules with reasonable cost and performance is an important step toward commercialization. In this work, solution-processed conventional and inverted OPV modules with an area of 216 cm2 were fabricated by the blade coating method. Film uniformity was controlled by adjusting the fabrication parameters of the blade coating procedure. The influence of the concentration of the solutions of the interfacial materials on OPV module performance was investigated. For OPV modules based on the PM6:Y6 photoactive layer, a certificated power conversion efficiency (PCE) of 9.10% was achieved for the conventional OPV modules based on the TASiW-12 interfacial layer while a certificated PCE of 11.27% was achieved for the inverted OPV modules based on the polyethylenimine (PEI) interfacial layer. As for OPV modules based on a commercially available photoactive layer, PV-X Plus, a PCE of 8.52% was achieved in the inverted OPV modules. A halogen-free solvent, o-xylene, was used as the solvent for PV-X Plus, which makes the industrial production much more environmentally friendly.

Bulk-Heterojunction Adjustment Enables a Self-filtering Organic Photodetector with a Narrowband Response.

Image-sensor technology is the foundation of many emerging applications, where the photodetector is designed to interact with incoming photons that have specific colors or wavelengths. A color filter is therefore crucial to enable the selective spectral response of the photodetector and to eliminate the crosstalk interference resulting from ambient lights. Unfortunately, a reduced detection sensitivity of the photodetector is inevitable due to an imperfect light filtering, which greatly limits the practical applications of selective-response photodetectors. Herein, we demonstrate a bulk-heterojunction (BHJ) organic composite featuring a self-filtering light responsive characteristic. Through a careful optimization of the BHJ film, the organic photodetector (OPD) demonstrates a high-selective spectral response to the infrared (IR) radiation without the need of applying a color filter. As a result, the self-filtering top-illuminated OPD exhibits a narrowband external quantum efficiency (EQE) of 53% with a narrow full width at half-maximum (fwhm) of 56 nm centering at 1080 nm. A high responsivity of 0.46 A W-1 is also achieved at 1080 nm wavelength due to the self-filtering characteristic.

High-Performance Organic Solar Cells Featuring Double Bulk Heterojunction Structures with Vertical-Gradient Selenium Heterocyclic Nonfullerene Acceptor Concentrations.

In this study, we prepared organic photovoltaics (OPVs) featuring an active layer comprising double bulk heterojunction (BHJ) structures, featuring binary blends of a polymer donor and concentration gradients of two small-molecule acceptors. After forming the first BHJ structure by spin-coating, the second BHJ layer was transfer-printed onto the first using polydimethylsiloxane stamps. A specially designed selenium heterocyclic small-molecule acceptor (Y6-Se-4Cl) was employed as the second acceptor in the BHJ. X-ray photoelectron spectroscopy revealed that the two acceptors formed a gradient concentration profile across the active layer, thereby facilitating charge transportation. The best power conversion efficiencies (PCEs) for the double-BHJ-structured devices incorporating PM6:Y6-Se-4Cl/PM6:Y6 and PM6:Y6-Se-4Cl/PM6:IT-4Cl were 16.4 and 15.8%, respectively; these values were higher than those of devices having one-BHJ structures based on PM6:Y6-Se-4Cl (15.0%), PM6:Y6 (15.4%), and PM6:IT-4Cl (11.6%), presumably because of the favorable vertical concentration gradient of the selenium-containing small-molecule Y6-Se-4Cl in the active layer as well as some complementary light absorption. Thus, combining two BHJ structures with a concentration gradient of the two small-molecule acceptors can be an effective approach for enhancing the PCEs of OPVs.

Single-Junction Organic Solar Cell Containing a Fluorinated Heptacyclic Carbazole-Based Ladder-Type Acceptor Affords over 13% Efficiency with Solution-Processed Cross-Linkable Fullerene as an Interfacial Layer.

In this article, a fluorinated heptacyclic dithienocyclopentacarbazole (DTC)-based non-fullerene acceptor (NFA), DTC(4Ph)-4FIC, is synthesized and blended with J71, PBDB-T, and PBDB-TF, featuring complementary absorption and well-matched energy levels. The DTC(4Ph)-4FIC neat film exhibits face-on preference, whereas the nonfluorinated counterpart, DTC(4Ph)-IC, exhibits edge-on preference; this unique feature owing to fluorination in DTC-based NFAs is observed for the first time. More importantly, DTC(4Ph)-4FIC exhibits improved power conversion efficiencies (PCEs) of 10.92 and 10.41% in J71- and PBDB-T-containing devices, while the devices that employed DTC(4Ph)-IC afford PCEs of 7.76 and 9.48%, respectively. Because PBDB-TF is known to exhibit lower energy levels than J71 and PBDB-T, the corresponding device affords a VOC of 0.95 V, a JSC of 18.29 mA cm-2, a FF of 75.70%, and a PCE of 13.15%, which is 20 and 26% higher than J71- and PBDB-T-containing devices. Furthermore, the inverted device containing the PBDB-TF:DTC(4Ph)-4FIC blend is fabricated using cross-linkable fullerene (C-PCBSD) as the cathode interlayer, affording a decent PCE of 13.36%, with a VOC of 0.94 V, a JSC of 20.20 mA cm-2, and a FF of 70.42%.

Haptacyclic Carbazole-Based Ladder-Type Nonfullerene Acceptor with Side-Chain Optimization for Efficient Organic Photovoltaics.

In this research, a haptacyclic carbazole-based dithienocyclopentacarbazole (DTCC) ladder-type structure was formylated to couple with two 1,1-dicyanomethylene-3-indanone (IC) moieties, forming a new nonfullerene acceptor DTCCIC-C17 using a bulky branched 1-octylnonayl side chain at the nitrogen of the embedded carbazole and four 4-octylphenyl groups at the sp3-carbon bridges. The rigid and coplanar main-chain backbone of the DTCC core provides a broad light-absorbing window and a higher-lying LUMO energy level, whereas the bulky flanked side chains reduce intermolecular interactions, making DTCCIC-C17 amorphous with excellent solution processability. The DTCCIC-C17 as an acceptor is combined with a medium band gap polymer poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione))] (PBDB-T) as the donor in the active layer to obtain suitable highest occupied molecular orbital/lowest unoccupied molecular orbital energy alignments and complimentary absorption. The devices with an inverted configuration (ITO/ZnO/active layer/MoO3/Ag) without using an aqueous poly(3,4-ethylenedioxythiophene) polystyrene sulfonate layer were fabricated for better device stability. When the diiodooctane-treated PBDB-T:DTCCIC-C17 active layer was thermally annealed at 50 °C for 10 min, the device achieved the highest efficiency of 9.48% with a high Voc of 0.98 V, a Jsc of 14.27 mA cm-2, and an FF of 0.68.